Skip to content
Made to Order. Ready to Hang.

Measuring guide

How to measure

You choose the finished track width and the drop. We handle fabric fullness and manufacturing allowances.

Total track width

Total track coverage = your widthInclude the stack space either side of the window
  • Measure the full length the track will cover.
  • If it covers a 3-metre opening, choose 3 m.
  • Do not add extra for fullness. We do that.

Floor to ceiling

CeilingFloorFloor to ceiling (mm)
  • Use when there is no cornice or the track sits at ceiling level.
  • Measure straight down from the ceiling to the floor, in millimetres. The centimetre equivalent is shown as you type.

Floor to below cornice

CorniceFloorFloor to below cornice (mm)
  • Mount the track below the cornice.
  • Measure from the underside of the cornice down to the floor, in millimetres. Do not measure up into the cornice.

Space for two tracks

Sheer (rear)Blockout (front)Leave clearanceWall
  • The sheer track sits at the rear and the blockout track at the front.
  • Leave room between the two for the curtains to move.
  • Allow for installation and floor clearance.

Standard drop

2.1 m (210.0 cm)2100 mm
2.2 m (220.0 cm)2200 mm
2.3 m (230.0 cm)2300 mm
2.4 m (240.0 cm)2400 mm
2.5 m (250.0 cm)2500 mm
2.6 m (260.0 cm)2600 mm
2.7 m (270.0 cm)2700 mm
  • Pick the standard drop closest to your measurement.
  • Each size is shown in metres, centimetres and millimetres.

Which way does it open?

Panels stack both sidesPanel stacks on the leftPanel stacks on the right
  • Left and right are seen from inside the room, facing the window.
  • Centre opening stacks half on each side. Side openings stack on one side.